Olcay Mix Series

Our Olcay Mix Series products are certified with TSE, ISO, and CE standards. (TS EN 14411; ISO 9001)

Thanks to the low water absorption of porcelain tiles, Olcay Mix Series offers high resistance against temperature changes and challenging weather conditions like rain, snow, and frost.

The water absorption rate of the Olcay Mix Series is below 0.5%, providing near-zero porosity and long-term structural durability.

Made from 100% porcelain, Olcay Mix tiles are designed to withstand UV rays and maintain their earthy tones and surface definition over many years, even under direct sunlight.

A 3 mm grout joint is recommended for best alignment, seamless design, and structural stability.

According to TS EN 14411 standards, the nominal size includes the tile dimensions plus the joint width. Accurate planning requires grout spacing to be included in m² calculations.

Inspired by natural textures, the Olcay Mix Series is produced with multiple surface patterns, ensuring a unique, organic aesthetic and preventing repetition across wide surface applications.

Yes. The series includes pool copings, pool grates, stair non-slip, and complementary inner trim, outer trim, Scoth Inner Corner, and Scoth Outer Corner pieces – all made from 100% porcelain to complete any Pool Edge System with consistency and elegance.

Stair non-slip tiles ensure safety in wet areas with their textured surface and chamfered edges. These features enhance visibility and reduce the risk of slips, especially on swimming pool steps.

Inner and outer trim pieces provide soft transitions at corners, elevate design continuity, minimize impact risk, and contribute to easy maintenance and hygiene around critical edges.

Thanks to their non-porous, stain-resistant structure, Olcay Mix porcelain pool tiles resist algae, limescale, and dirt accumulation. Their smooth surface supports hygiene and allows for easy cleaning with regular care.

In overflow pools, the pool coping should be applied with a slope of 3%–8% to direct water effectively into the weir channel. In training pools, a 4.7% slope is required per standard specifications.

To ensure long-lasting results and avoid waterproofing issues, old surfaces should be removed before installation. Proper insulation must be applied, and porcelain tiles installed by professionals for a reliable pool renovation.

The warm earth tones of Olcay Mix tiles give the water a natural, soft bronze or olive hue, depending on sunlight, pool depth, water clarity, and surrounding landscape.